Clean and clear filter manual

Open the High Flow™ manual air relief valve until it snaps into the full open position (this only requires a quarter turn counter-clockwise). Opening this valve rapidly releases air trapped in the filter. 2. Stand clear of the filter tank, then start the pump. 3. Close the High Flow™ manual air relief valve after a steady stream of water appears. www.doorway.ru Size: KB. filter clamp while there is any pressure in the filter. 2. Be certain the O-ring is in position in the lower tank half. Place the filter lid over the lower tank half sandwiching the O-ring in between. 3. Holding the ends of the filter clamp apart, position the center segment of the filter clamp over both upper and lower tank flanges. Bring the. Open the High Flow™ manual air relief valve until it snaps into the full open position (this only requires a quarter turn counterclockwise). Opening this valve rapidly releases air trapped in the filter. 2. Stand clear of the filter tank, then start the pump. 3. Close the High Flow™ manual air relief valve after a steady stream of water appears. 4.

filter tank, the D.E. coats the filter grids and filters out even the most minute particles resulting in clear, clean, sparkling water. After a period of time, the accumulated dirt in the filter causes a resistance to flow, the pressure rises, and flow diminishes. This means the dirt holding capacity of the D.E. has been. Pentair Clean And Clear RP Cartridge Filter EC The Clean Clear RP cartridge filter gives you everything you could ask for in a filter. This new design is nearly 50% more efficient than any other single cartridge filter on the market. At the same time, it delivers top-of-the-line cartridge performance to ke. Pentair Clean Clear Filters feature a chemical resistant tank with no-tool servicing and a coreless cartridge for easier cleaning. All models are equipped with easy spin-on unions for plumbing hook-ups. These filters are NSF listed for commercial applications and are available in 50, 75, , , and square foot sizes.

filter clamp while there is any pressure in the filter. 2. Be certain the O-ring is in position in the lower tank half. Place the filter lid over the lower tank half sandwiching the O-ring in between. 3. Holding the ends of the filter clamp apart, position the center segment of the filter clamp over both upper and lower tank flanges. Bring the. Be sure the O-ring is clean and in position in the lower tank half. Press the Clean and ClearﾂｮPlus Cartridge Filter lid onto the lower half so the O-ring its in between the tank halves. 2. Hold the ends of the clamp ring apart and place over both upper and lower tank langes. 1. The Clean and Clear® RP Cartridge Filter operates under pressure. When the lock ring is installed properly and operated without air in the water system, this filter will operate in a safe manner. 2. The maximum working pressure of this filter is 50 psi. Never subject this filter to pressure in excess of this.